PFLOTRAN-SIP: A PFLOTRAN Module for Simulating Spectral-Induced Polarization of Electrical Impedance Data

Spectral induced polarization (SIP) is a non-intrusive geophysical method that is widely used to detect sulfide minerals, clay minerals, metallic objects, municipal wastes, hydrocarbons, and salinity intrusion. However, SIP is a static method that cannot measure the dynamics of flow and solute/species transport in the subsurface. To capture these dynamics, the data collected with the SIP technique needs to be coupled with fluid flow and reactive-transport models. To our knowledge, currently, there is no simulator in the open-source literature that couples fluid flow, solute transport, and SIP process models to analyze geoelectrical signatures in a large-scale system. A massively parallel simulation framework (PFLOTRAN-SIP) was built to couple SIP data to fluid flow and solute transport processes. This framework built on the PFLOTRAN-E4D simulator that couples PFLOTRAN and E4D, without sacrificing computational performance. PFLOTRAN solves the coupled flow and solute transport process models to estimate solute concentrations, which were used in Archie's model to compute bulk electrical conductivities at near-zero frequency. These bulk electrical conductivities were modified using the Cole-Cole model to account for frequency dependence. Using the estimated frequency-dependent bulk conductivities, E4D simulated the real and complex electrical potential signals for selected frequencies for SIP. The PFLOTRAN-SIP framework was demonstrated through a synthetic tracer-transport model simulating tracer concentration and electrical impedances for four frequencies. Later, SIP inversion estimated bulk electrical conductivities by matching electrical impedances for each specified frequency. The estimated bulk electrical conductivities were consistent with the simulated tracer concentrations from the PFLOTRAN-SIP forward model.